prikaz prve stranice dokumenta Prevention of spontaneous combustion of cellulose with a thin protective Al2O3 coating formed by atomic layer deposition
Rad nije dostupan
Znanstveni rad - Izvorni znanstveni rad
Prevention of spontaneous combustion of cellulose with a thin protective Al2O3 coating formed by atomic layer deposition
Surface & coatings technology, 333 (2018); 81-86. https://doi.org/10.1016/j.surfcoat.2017.10.067
Omerzu, Aleš; Šarić, Iva; Kavre Piltaver, Ivna; Petravica, Mladen; Kapun, Tea; Zule, Janja; Štifter, Sanja; Salamon, Krešimir

Citirajte ovaj rad

Omerzu, A., Šarić, I., Kavre Piltaver, I., Petravica, M., Kapun, T., Zule, J. ... Salamon, K. (2018). Prevention of spontaneous combustion of cellulose with a thin protective Al2O3 coating formed by atomic layer deposition. Surface & coatings technology, 333., 81-86. doi: 10.1016/j.surfcoat.2017.10.067

Omerzu, Aleš, et al. "Prevention of spontaneous combustion of cellulose with a thin protective Al2O3 coating formed by atomic layer deposition." Surface & coatings technology, vol. 333, 2018, str. 81-86. https://doi.org/10.1016/j.surfcoat.2017.10.067

Omerzu, Aleš, Iva Šarić, Ivna Kavre Piltaver, Mladen Petravica, Tea Kapun, Janja Zule, Sanja Štifter i Krešimir Salamon. "Prevention of spontaneous combustion of cellulose with a thin protective Al2O3 coating formed by atomic layer deposition." Surface & coatings technology 333 (2018): 81-86. https://doi.org/10.1016/j.surfcoat.2017.10.067

Omerzu, A., et al. (2018) 'Prevention of spontaneous combustion of cellulose with a thin protective Al2O3 coating formed by atomic layer deposition', Surface & coatings technology, 333, str. 81-86. doi: 10.1016/j.surfcoat.2017.10.067

Omerzu A, Šarić I, Kavre Piltaver I, Petravica M, Kapun T, Zule J, i sur.. Prevention of spontaneous combustion of cellulose with a thin protective Al2O3 coating formed by atomic layer deposition. Surface & coatings technology [Internet]. 2018. [pristupljeno 14.11.2024.];333:81-86. doi: 10.1016/j.surfcoat.2017.10.067

A. Omerzu, et al., "Prevention of spontaneous combustion of cellulose with a thin protective Al2O3 coating formed by atomic layer deposition", Surface & coatings technology, vol. 333, str. 81-86, 2018. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:184:162338. [Citirano: 14.11.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:184:162338
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Prevention of spontaneous combustion of cellulose with a thin protective Al2O3 coating formed by atomic layer deposition
AutorAleš Omerzu
MBZ: 353774
AutorIva Šarić
MBZ: 307185
AutorIvna Kavre Piltaver
MBZ: 348060
AutorMladen Petravica
AutorTea Kapun
AutorJanja Zule
AutorSanja Štifter
AutorKrešimir Salamon
MBZ: 241362
Autorova ustanovaSveučilište u Rijeci
Medicinski fakultet
(Katedra za opću patologiju i patološku anatomiju)
Znanstveno / umjetničko
područje, polje i grana		PRIRODNE ZNANOSTI
Fizika
Sažetak (engleski)
We have studied properties of thin protective coating layers of Al2O3, grown by atomic layer deposition (ALD) technique on surfaces of cellulose fibrous materials, using scanning electron microscopy (SEM), scanning transmission microscopy (STEM), energy dispersive x-ray spectroscopy (EDS), high- resolution transmission microscopy (HR-TEM), x- ray diffraction (XRD) and thermal gravimetry (TGA). A minimum thickness of about 50 nm was required to completely inhibit oxygen diffusion into the material and prevent self-ignition at elevated temperatures. No substantial differences were found in morphology or protection performance of Al2O3 coatings produced by thermal or plasma-enhanced ALD (PEALD) methods. However, PEALD technique has shown almost a double growth rate, while, at the same time, it was successfully applied at temperatures as low as 40 °C without degrading quality of the coating.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaSurface & coatings technology
Brojčani podacivol. 333, str. 81-86
p-ISSN0257-8972
DOIhttps://doi.org/10.1016/j.surfcoat.2017.10.067
URN:NBNurn:nbn:hr:184:162338
Datum objave publikacije2018
URL dokumentahttp://bib.irb.hr/922559
Vrsta resursaTekst
Prava pristupaZatvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2022-03-03 15:27:24