prikaz prve stranice dokumenta Electrospinning of PCL/CEFUROXIM® fibrous scaffolds on 3D printed collectors
Access restricted to all Croatian higher education institution's students and staff
Scientific paper - Original scientific paper
Electrospinning of PCL/CEFUROXIM® fibrous scaffolds on 3D printed collectors
Journal of the textile institute, 111 (2020), 9; 1288-1299. https://doi.org/10.1080/00405000.2019.1707347
Holjevac Grgurić, Tamara; Mijović, Budimir; Zdraveva, Emilija; Govorčin Bajsić, Emi; Šlivac, Igor; Ujčić, Massimo; Dekaris, Iva; Tominac Trcin, Mirna; Vuković, Anamarija; Kuzmić, Sunčica; Ledić, Andrea; Čop, Maja Jelena; Logarušić, Marijan

Cite this document

Holjevac Grgurić, T., Mijović, B., Zdraveva, E., Govorčin Bajsić, E., Šlivac, I., Ujčić, M. ... Logarušić, M. (2020). Electrospinning of PCL/CEFUROXIM® fibrous scaffolds on 3D printed collectors. Journal of the textile institute, 111. (9), 1288-1299. doi: 10.1080/00405000.2019.1707347

Holjevac Grgurić, Tamara, et al. "Electrospinning of PCL/CEFUROXIM® fibrous scaffolds on 3D printed collectors." Journal of the textile institute, vol. 111, no. 9, 2020, pp. 1288-1299. https://doi.org/10.1080/00405000.2019.1707347

Holjevac Grgurić, Tamara, Budimir Mijović, Emilija Zdraveva, Emi Govorčin Bajsić, Igor Šlivac, Massimo Ujčić, Iva Dekaris, et al. "Electrospinning of PCL/CEFUROXIM® fibrous scaffolds on 3D printed collectors." Journal of the textile institute 111, no. 9 (2020): 1288-1299. https://doi.org/10.1080/00405000.2019.1707347

Holjevac Grgurić, T., et al. (2020) 'Electrospinning of PCL/CEFUROXIM® fibrous scaffolds on 3D printed collectors', Journal of the textile institute, 111(9), pp. 1288-1299. doi: 10.1080/00405000.2019.1707347

Holjevac Grgurić T, Mijović B, Zdraveva E, Govorčin Bajsić E, Šlivac I, Ujčić M, and sur.. Electrospinning of PCL/CEFUROXIM® fibrous scaffolds on 3D printed collectors. Journal of the textile institute [Internet]. 2020 [cited 2024 December 26];111(9):1288-1299. doi: 10.1080/00405000.2019.1707347

T. Holjevac Grgurić, et al., "Electrospinning of PCL/CEFUROXIM® fibrous scaffolds on 3D printed collectors", Journal of the textile institute, vol. 111, no. 9, pp. 1288-1299, 2020. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:184:902896. [Accessed: 26 December 2024]

Please login to the repository to save this object to your list.
Metadata
Title (english)Electrospinning of PCL/CEFUROXIM® fibrous scaffolds on 3D printed collectors
AuthorTamara Holjevac Grgurić
MBZ: 241081
AuthorBudimir Mijović
MBZ: 173291
AuthorEmilija Zdraveva
MBZ: 320042
AuthorEmi Govorčin Bajsić
MBZ: 127332
AuthorIgor Šlivac
MBZ: 266792
AuthorMassimo Ujčić
AuthorIva Dekaris
AuthorMirna Tominac Trcin
MBZ: 266314
AuthorAnamarija Vuković
AuthorSunčica Kuzmić
AuthorAndrea Ledić
AuthorMaja Jelena Čop
MBZ: 311345
AuthorMarijan Logarušić
MBZ: 380513
Author's institutionUniversity of Rijeka
Faculty of Medicine
(Department of Ophthalmology)
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Metallurgy
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Chemical Engineering
Scientific / art field,
discipline and subdiscipline		BIOTECHNICAL SCIENCES
Biotechnology
Scientific / art field,
discipline and subdiscipline		INTERDISCIPLINARY AREAS OF KNOWLEDGE
Biotechnology in Biomedicine (natural science, biomedicine and healthcare, bioethics area
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Textile Technology
Abstract (english)
In this paper, the effect of different collector geometry on the PCL scaffold architecture and cell viability was investigated. PCL scaffolds with antibiotic CefuroximVR , 15%wt. and 20%wt., were electrospun and characterized by ATR-FTIR, while thermal stability were observed by DSC and TG. PCL/15%CFUVR scaffolds were electrospun on six 3D printed collectors, three ribbed and three mesh geometries, to produce the most favourable structure for cells adhesion and proliferation. SEM study and MTT assay revealed that collectors with the widest slot in both ribbed and mesh geometries exhibited the most favourable structure to enhance cells adhesion. In general, cells spreading on the surface and cells viability proved to be better for the ribbed collectors. The study showed that by controlling the collector geometry and the scaffold three-dimensional structure, it is possible to control cell attachment and differentiation and, consequently, to adjust them for the special tissue demands in the regeneration process.
Keywords (english)
Languageenglish
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewPeer review
Publication versionPublished version
Journal titleJournal of the textile institute
Numberingvol. 111, no. 9, pp. 1288-1299
p-ISSN0040-5000
DOIhttps://doi.org/10.1080/00405000.2019.1707347
URN:NBNurn:nbn:hr:184:902896
Publication2020
ProjectNumber: IP-2016-06-6878
Title (croatian): Ciljana izrada prototipa vlaknastog nosača za uzgoj tkivnih stanica kombiniranim elektroispredanjem
Acronym: COMBOELECTROSPUN
Leader: Budimir Mijović
Jurisdiction: Croatia
Funding stream: IP
Document URLhttp://bib.irb.hr/1064747
Type of resourceText
Access conditionsRestricted access
Terms of useLicence In copyright icon
Created on2022-02-18 08:06:41